Dropping or splashing your iPhone 12 in water can be a cause for concern. Although efforts are made to produce water-resistant devices, they are not completely waterproof and may have negative consequences. But don’t worry. After your device has been exposed to water, the problem can be fixed with the right methods. In this article, we will focus on how to recognize water damage and how to repair it with the Fix My Speaker tool.
What to Do First When Your iPhone Drops in Water
Don’t panic if your device falls into water. First, remove the phone from the water and turn it off immediately. If the device remains on, water can reach sensitive circuits and short-circuit them. Your device should remain turned off until the drying process is complete.
After that, important and removable parts such as the case, battery, SIM card, and memory card should be removed. The device should be easy to dry.
Then, gently dry the device’s exterior and any accessible areas with a soft, lint-free cloth. Carefully check areas where water might enter, such as the charging port, speaker grilles, and SIM card slot. If possible, the device should be placed vertically. This allows some of the liquid inside to drain out through gravity.
Then, you can choose either the rice or silica gel method. After placing your device in the silica or rice box, you should let it sit for 24 or 48 hours. During this process, do not turn on your device or plug it into a charger.
After ensuring the device is completely dry, turn it on. Then, use the Water Eject tool on our Phone Sound Fix website. Our tool is very easy to use. You can use it to remove any remaining water inside the device.
How to Detect iPhone 12 Water Damage
Do you suspect water has gotten into your device but aren’t sure? There are easy ways to tell. Let’s find out together:
- One of the most common symptoms is audio issues. If your speaker is crackling, muffled, or very quiet, it could be because moisture inside the device hasn’t been released. Similar problems while recording audio or talking on the phone also indicate a problem.
- Problems with components other than the speaker may also indicate a water problem in the device. For example, the touchscreen acting as if it is pressing on its own, a delayed response, or fluctuations in screen brightness.
- Additionally, fogging or spotting on the camera lens indicates that water has reached the internal components of the device.
If the screen and camera issues persist, you may need assistance from a technician. For simple speaker issues, we recommend using our Fix My Speaker Tool.
What is iPhone 12 Water Eject and How to Do It?
Water Eject is a simple app that lets you use sound waves to remove water accumulated in your iPhone’s speaker grills or audio hardware using our Fix My Speaker tool. The purpose of this tool is to generate a low-frequency, powerful vibration that causes the speaker diaphragm to move.
This forces any accumulated liquid in the speaker cavity out. An important warning: If water has penetrated the interior of the device and has remained there for an extended period, the tool alone may not be sufficient. Now, let’s see how to use it:
- Step 1: First of all, you should visit our Phone Sound Fix website and open the Fix My Speaker tool.
- Step 2: Then, increase the volume on your device. A high volume is important for better results. However, it’s important to note that using the device at high volume for extended periods can be harmful. Either increase the volume gradually or avoid using it for extended periods!
- Step 3: The tool has two modes: Sound and Vibration. The Sound mode consists of sounds at specific frequencies and varying levels. First, select this mode and click the Run button. Wait until the process is complete.
- Step 4: Then switch to Vibration mode and run it the same way. This process may take 2-3 minutes. You can see the progress in the progress bar.
- Step 5: After the process is complete, check the audio quality. If you don’t get the results you’re looking for, you can repeat this process a few more times.
Frequently Asked Questions (FAQ)
Can using Water Eject damage the iPhone 12?
No, Water Eject won’t harm your iPhone 12. However, you may encounter some problems and risks when using it at very high volumes or with untrusted apps.
Does Water Eject remove all the water from the speakers?
The Fix My Speaker tool is quite effective at removing most of the water that has accumulated on the speaker grilles, but it doesn’t completely remove any remaining moisture from the device’s internal components.
Is the Fix My Speaker tool a reliable method?
Fix My Speaker is a completely reliable method. It doesn’t affect your device’s hardware. It also doesn’t cause any harm because there’s no need to download an app or audio file.
How often can I use the tool for water eject iPhone 12?
You can use it a few times a month for regular cleaning. However, unnecessarily frequent use can cause wear on the speaker diaphragm. Therefore, it’s best to keep a close eye on it.